imx93w_evk
U-Boot for the NXP i.MX93W EVK board.
Quick Start
Get and Build the ARM Trusted firmware
Get the DDR firmware
Get ahab-container.img
Build U-Boot
Boot
Get and Build the ARM Trusted firmware
Note: srctree is U-Boot source directory Get ATF from: https://github.com/nxp-imx/imx-atf/ branch: lf_v2.14
$ git clone -b lf_v2.14 https://github.com/nxp-imx/imx-atf.git
$ cd imx-atf
$ export CROSS_COMPILE=aarch64-poky-linux-
$ unset LDFLAGS
$ unset AS
$ make PLAT=imx93 bl31
$ cp build/imx93/release/bl31.bin $(srctree)
Get the DDR firmware
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.32-1991416.bin
$ chmod +x firmware-imx-8.32-1991416.bin
$ ./firmware-imx-8.32-1991416.bin
$ cp firmware-imx-8.32-1991416/firmware/ddr/synopsys/lpddr4*v202201.bin $(srctree)
Get ahab-container.img
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-2.0.6-c0b284c.bin
$ chmod +x firmware-ele-imx-2.0.6-c0b284c.bin
$ ./firmware-ele-imx-2.0.6-c0b284c.bin
$ cp firmware-ele-imx-2.0.6-c0b284c/mx93a1-ahab-container.img $(srctree)
Build U-Boot
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx93w_evk_defconfig or imx93w_evk_inline_ecc_defconfig
$ make
Burn the flash.bin to MicroSD card offset 32KB:
$ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
Boot
Set Boot switch to SD boot.